Mini Beverage Bar - Perfectly sized!
Couldn’t find a coffee bar to fit my space so I modified the Snack Cabient plans of Ana White's! Looove how it turned out! The barn door hardware was fun!
Laura Thompson
Couldn’t find a coffee bar to fit my space so I modified the Snack Cabient plans of Ana White's! Looove how it turned out! The barn door hardware was fun!
Laura Thompson
My mom was looking for a new outdoor table, and asked me to come up with something. I found the link for these plans (http://www.thedesignconfidential.com/2011/04/free-diy-furniture-plans-t…) to knock off Restoration Hardware's $4000 Provence Beam outdoor table. Overall I liked the plan, with the chunkier look of the 4x4's. But there were a lot of errors in the diagrams, and the finished height is 34" which is ridiculously tall for a table. So we took it apart and cut the legs back down to change the finished height to 30". We chose rough-cut cedar for it's look and outdoor properties, not wanting to use treated lumber for a dining table. We couldn't find 2x10's like the plan, so we substituted seven 2x6's just like Ana's plan, but left a 1/2" gap in between so water can drain and not pool on top and rot the wood. Also, since we were working with 4x4's for the legs, we chose heavy duty lag bolts instead of screws to join them together. I love the finished look they give. Overall it's a sturdy, yet lightweight table that my mom loves and has already used for entertaining!
Wed, 04/25/2012 - 10:02
Thanks Brook! It was so much fun to build. I put my dad and husband to work while I was the "project manager" ;)
This Pioneer bed took me several weekends this winter, doing a little at a time. It was a challenge for sure because there were a few errors in the plans, but with some improvisation it was easily avoided. This bed is very simplistic but the design allows for some personal flare and variation to be added. Be sure to make precise cuts! Be sure to pick out straight boards!
I used specialized software to make the head and foot curves and printed them on paper, then transferred them to the wood. I did not put the two blocks on the headboard posts...because to me it just looked plain silly! I added two bun feet to make it look like genuine bed knobs and they look excellent. Also for the foot board posts I used specialized square pieces of wood found in the hardware store that have a nice design in them doe a decorative look. they indent far enough towards the bed that they actually hold the sheets in place!
I did not paint it. Instead I used a golden oak stain, one coat. Then put two coats of high gloss on it. This also strengthened the soft white pine I used to build it.
I did not follow the part about the slat placement nor where the bed rails should be mounted, as this will vary depending on the thickness of the mattress you get, or if it has a box spring.
I used bolts to hold the bed rails in as well, along with nails and screws.
Sandpaper! Use it a lot!
$65 to build, although I already had nails, glue, sandpaper, stain, and varnish.
My daughter just loves it and I know it will be around for years to come!!! Everyone in my family loves it too. I highly suggest anyone who is looking for a simplistic looking twin bed, and who knows how to take their time and follow directions, to make this bed. Feel free to write me if you need help. [email protected]
Sat, 02/08/2014 - 15:51
Thank you Ana White for such a nice website with great resources for all of us who like to build things ourselves and save a buck or two!
We worked on this project on and off for a couple weeks. 60 degree angles were the hardest part. Decided against adding upper coop floor to minimize cleaning. Coop will only be used seasonally. End coop is very heavy, so wheels were a must. Scoured internet and found simple retractable lever design with bolts to adjust wheel height. Very happy with project, thank you Ana!
This was pretty difficult for a beginner, but only because I had never made something with a frame that had to be squared up. I didn't realize I need a big square and should have checked each join of the 2x2's to the plywood. Ended up that the center supports were not square but this was after I had already made doors and drawers. So I rigged them up with shims to make them fit better. However, I still think it turned out great and one day may take it down and fix it or sell this one and make another. I added tea stained vintage font numbers to the pulls. To me, this really made the piece special. I would suggest a little more instructions for doors and drawers. Ana has a great youtube on drawers I found today. I will definitely use that method next time.
Working on getting furniture done for my kids. Gives me something to do when they are away on visitation. New furniture from a store is too expensive right now & gives me something to work on to keep my mind off of things.
Modified to fit a Twin XL mattress.
Fri, 04/27/2012 - 13:37
Beautiful job! I love the color. I have memories of being gone for weekends on visits and coming home to a newly decorated "Rainbow Brite" bedroom and my mom assembling a waterbed for me on the kitchen floor (it was the eighties); it felt great to know that my mom was thinking about me while I was gone, your kids will not forget those things.
Wed, 05/16/2012 - 09:48
Hi!, i am new to all of this and would love to make this bed for my daughter, could you share the measurements for the twin version? thanks!
Sat, 06/02/2012 - 03:12
Hi, I like this bed for my son, also looking for the measurements for the twin version.Thanks
Sat, 09/01/2012 - 20:31
I built a similar bed for my niece. I designed the boxes slightly different however. I followed the Twin Farmhouse plan but removed one board from the headboard/footboard panels. This narrows the width to accomodate the storage boxes. http://ana-white.com/2012/03/twinning
Sun, 01/17/2016 - 09:17
Hi! I know this question has been posted before and replied to but, for some reason, I can't see the replies so... would anyone mind maybe sharing their converted measurements for a twin sized bed? Thank so much! This will be our first project and I'm sooo nervous!
Sun, 01/17/2016 - 09:17
Hi! I know this question has been posted before and replied to but, for some reason, I can't see the replies so... would anyone mind maybe sharing their converted measurements for a twin sized bed? Thank so much! This will be our first project and I'm sooo nervous!
Fri, 02/05/2016 - 20:20
I made this bed in a twin. The twin mattress is 39x75. That's 21 inches narrower and 5 inches shorter than a queen. So just make the head board, foot board, and slat measurements 21 inches shorter keeping the height the same. The length is five inches shorter but to get three drawer slots the same size I made mine 75 3/4 long. ( 24 1/4 for each drawer slot).
35X72 standard table height.
Made this Farmhouse table for my daughter for her birthday tomorrow. Hope she enjoys it as much as I enjoyed making it. Happy birthday my girl.
I enjoyed this project. Easy instructions. Great results.
I adjusted your Barndoor l Pantry plans to utilize repurposed lumber from a Murphy bed. The shelves are 22" deep for my microwave, toaster oven, etc. It's so functional and much easier to work in my small kitchen.
Cheryl G
I modified the plans like another brag poster did. How I built this is explained on my site. Thank you so much to the other poster for the inspiration!! And of course, thank you to Ana White for this amazing site!
This project was easy & fun to make.
King bed hand made made with 1by4 pine boards
Brookstone desk with a white oak top and drawer that I built for my 8- yr old son. It is a very fun build.
Jerry from NC
Wed, 03/27/2024 - 09:17
Having a well-organized writing desk is very important for optimal productivity. While services like https://domypapers.com/creative-writing/ offer assistance with creative writing tasks, finding inspiration in a well-organized workspace is equally important for writing success.
Fri, 05/17/2024 - 02:11
Having a comfortable desk is very important to me. A comfortable desk helps me focus and increases my productivity. Plus, the best book review writing service gives me easy access to professional help to polish my resume and make it stand out. So if you're serious about landing that dream job, investing in a good desk and using Skillroads' services is a winning combination!
Fri, 05/17/2024 - 10:45
As a student, having a comfortable workspace is crucial for productivity. A farmhouse writing desk not only adds charm to my room but also provides a functional space for studying and writing. Plus, with the help of reliable essay writing services like the one recommended on https://www.clevescene.com/sponsored/the-best-essay-writing-service-202… I can focus more on my studies without worrying about looming deadlines. It's all about creating a conducive environment for academic success.
I saw this on the site, and I knew it would be perfect for my soon to be 4 year old boy's room. I wanted something that would be strong (hellloooo 4 year old boy!!) and not too "babyish" to last him through several years of preference changes and growth. This was not too difficult at all! Though I slightly modified some of the construction to make it easier to break down. I ended up using a box spring with a mattress, instead of slats to save a bit of money. (We got the box spring and mattress for free from a relative.)
I made this out of pine, and bought everything from Home Depot. Total cost for everything (including paint, sandpaper, wood glue, etc) was about $160! We are loving it!
Thu, 05/03/2012 - 23:09
Hi,
I love what you have done here. We have just finished our first build and am about to start on another for our oldest girl. Check out our blog, its the latest entry on this page.
Love it.
Thanks,
Shane
This was my first project. I didn't even know how to use a drill. With the help of my husband I learned quickly. Everything came together rather well and making the cuts was fairly simple. I used a table saw instead of a skill saw which made the bigger cuts not quite straight. I will have to invest in one of those. Two problems I ran into was not having enough clamps. I had the one that came with the kreg jig but having another would have made it simpler when attaching the legs. I had to go out and get the right angle clamp for the jig and that was a lot simpler but will still purchase another clamp for the future. The other problem I faced was the table legs were not sturdy enough so we added a support post to the back of the desk you can see in the picture. I also made the mistake of purchasing wood filler the same color as the stain. So I have darker areas. Haha. It was great learning experience. And my ten year old is very happy with his desk.
Sun, 02/16/2014 - 18:15
We also didn't know how to attach the top. The plans don't give instructions for that and we had to figure that out on our own. We ended up doing pocket holes which takes away from the looks of it. But you can't notice it unless you look for it.
I needed a place for everyone to throw their bags instead of the kitchen table! I used the box plans from the fancy hall tree and modified the top, adding a shelf, and changed the design to accommodate the piece of plywood I already had and wanted to use for the back. I made it in two pieces for easier transport and assembled it inside the house. I used off the shelf pine and plain plywood for this. I found the cute numbered hooks on etsy :) I took my time building it and worked on it about an hour a day while my husband watched the kids.
Tweaked your plans slightly but I'm happy with results!
Handy Kandi
Comments
Ana White Admin
Fri, 09/22/2023 - 08:10
Love it!
Great finish choice and the perfect fit, love it!